Intex/Bestway Hose Adaptor A for 32/38mm pool hose

We are selling an Bestway/ Intex Hose adaptor A for Intex or Bestway pools
This adaptor screws onto either the inlet/outlet of an Intex pool or onto the inlet/outlet of an Intex Krystal clear pump filter set, (or any filter with a 2" male thread)

The adaptor then allows either 1.25" (32mm) or 1.5" (38mm) hose to be connected

Shown with 38mm (1.5") Hose

Each adaptor comes with:-

1 Plastic Screw Nut
1 Plastic stepped hose tail

(does not come with Jubilee clip)
It has a 2" female grey nut on one end and a stepped hose tail on the other side.
(Note that the internal diameter of the grey nut measures just under 2 1/4" or 58mm)
For example, it is ideal for use when using our Hot Splash heat pump (which has 1.25" /32mm connections)
It allows 1.25" or 1.5" pool hose to be connected to the pool and also to the pump/filter set.
It can also be used to allow hose to be connected to the backwash outlet of a sand filter
We also sell both 1.5" and 1.25" pool hose if you need this.
If you have any questions, please Contact Us