Pump Fittings
50mm Bypass Kit for Swimming Pool Heat Pumps (Grey)
“Friendly and helpful company who sell great wooden pools — for above-ground or in-ground installations. Quality kit and good advice throughout.”
£85
inc. VATIn stock — ready to ship
Free UK shipping on orders over £100. £9.50 below.
Product details
The bypass kit is recommended for installation of all heat pumps
Installing a bypass allows you to isolate the pool heat pump in winter while still allowing water to circulate around the pool water circuit to prevent freezing.
The bypass can also be used to adjust the water flow through the heat pump by slightly opening or closing the bypass valve.
Bypass Kit Contents
Our bypass kits contain:-
- 3 x Ball Valves
- 2 x T-Pieces
- 3 x 30cm pieces of 50mm pool pipe
 |
 |
 |
| 3 x Valves | 2 x T-Pieces |
3 x 30cm pieces of 50mm pool pipe |
(note that the kit does not include pipe or glue)
The kit is available in four sizes:-(note that the kit does not include pipe or glue)
- 1.5"
- 2"
- 50mm
- 63mm
To see which size you require, look at the writing stamped on your existing pool pipework.
(do not just measure the external diameter of your existing pipes as this is different)
PRICE INCLUDES FREE UK SHIPPING
For further information on installing a bypass, see our Installation section
Typical Bypass Arrangement
