Intex/Bestway Hose Adaptor A for 32/38mm pool hose

/*! elementor - v3.18.0 - 20-12-2023 */
.elementor-heading-title{padding:0;margin:0;line-height:1}.elementor-widget-heading .elementor-heading-title[class*=elementor-size-]>a{color:inherit;font-size:inherit;line-height:inherit}.elementor-widget-heading .elementor-heading-title.elementor-size-small{font-size:15px}.elementor-widget-heading .elementor-heading-title.elementor-size-medium{font-size:19px}.elementor-widget-heading .elementor-heading-title.elementor-size-large{font-size:29px}.elementor-widget-heading .elementor-heading-title.elementor-size-xl{font-size:39px}.elementor-widget-heading .elementor-heading-title.elementor-size-xxl{font-size:59px}

We are selling an Bestway/ Intex Hose adaptor A for Intex or Bestway pools

This adaptor screws onto either the inlet/outlet of an Intex pool or onto the inlet/outlet of an Intex Krystal clear pump filter set, (or any filter with a 2" male thread)

The adaptor then allows either 1.25" (32mm) or 1.5" (38mm) hose to be connected

Shown with 38mm (1.5") Hose

Each adaptor comes with:-

• 1 Plastic Screw Nut
• 1 Plastic stepped hose tail

(does not come with Jubilee clip)

It has a 2" female grey nut on one end and a stepped hose tail on the other side.

(Note that the internal diameter of the grey nut measures just under 2 1/4" or 58mm)

For example, it is ideal for use when using our Hot Splash heat pump (which has 1.25" /32mm connections)

It allows 1.25" or 1.5" pool hose to be connected to the pool and also to the pump/filter set.

It can also be used to allow hose to be connected to the backwash outlet of a sand filter

We also sell both 1.5" and 1.25" pool hose if you need this.

If you have any questions, please Contact Us