Kit 4 Above Ground Swimming Pool Connection Kit

Kit 4 Above Ground Swimming Pool Connection Kit

When installing an above ground pool, you may find it confusing to attach all the different hoses as each pool/pump and filter and heat pump comes with different connections.

At Heatpumps4Pools Ltd we have tried to make this task as easy as possible but there are a few different factors to take into account.

The basic layout should look like the picture below:

We have labelled the 6 connection points so that we can advise where the pieces of the Kit is to be positioned 1-6.

Please see below for this information

1. Description

This kit is ideal for the use with a an above ground pool that has hose tail connections

This allows the following Pump Filters:

• 4.4m3 Cartridge Filter
• SX925 Sand Filter
• Intex Krystal Clear Model 1 Sand Filter

with the following Heat Pumps:

1. Thermotec Mini

2. This Kit includes the following:

• 1 x 38mm Intex Hose – Use between the Pump and Filter and the Heat Pump (Connections 3 to 4)
• 2 x 2″ to 1″ Reducing Nipple (Connections 4 & 5)
• 2 x Adapter B (Connections 1 & 6)

2 x 2″ to 1″ Reducing Nipple (Connections 4 and 5)	1 x Intex 38mm Hose (Connections 3 to 4)	2 x Adapter B (Connections 1 and 6)

For our full sizing guide please click on the following link Above Ground Pipe Connection Guide

3. Fitting Guide

*Please note: The Krystal Clear pump and filter set is supplied with 2 x Intex Hoses (with the grey nuts, also 38mm – attach both of these to the Adapter B on the pool inlet/outlet).

1. The 2 x Reducing Nipple’s can be placed on the Inlet/Outlet of the Thermotec Heat Pump – (Connections 4 & 5)
2. The 38mm Intex Hose is to be screwed on to the outlet of the Krystal Clear pump/filter and the other end is to be screwed on to the Reducing Nipples that are already on the Heat pump. (Between Connections 3 to 4)
3. The 2x Adapter B’s can be placed on the pool Inlet/Outlet connectors

4. Availability

We try to hold a large amount of stock of these kits in the UK which can be shipped to any UK address on a 1 – 3 day delivery service.

However sometimes in very busy periods there may be a delay from suppliers on some of the parts needed for these kits – so we will update the website when this  situation occurs.

5. Delivery

Shipping for order under £100 is £9.50, orders over the £100 are free of charge to the UK Mainland.

We can ship the The Above Ground Pipe Connection Kits to any country. Please contact us for a shipping quote.

6. Assistance?

If you need any assistance or advice as to which model would be best for your pool, please email us

for more information, also see our FAQs page

All items sold in accordance with our terms and conditions

For all enquiries, please contact us at enquiries@heatpumps4pools.com