Asin Aqua Oxygen Non-Chlorine and PH Automatic Pool Dosing and Pool Management System

Asin Aqua Oxygen Non-Chlorine & PH Automatic Pool Dosing & Pool Management System

1. Description
The ASIN AQUA Oxygen is a top of the range swimming pool automatic dosing system offered at an amazing price

The Oxygen model is a non-chlorine pool dosing system which typically uses hydrogen peroxide rather than liquid chlorine to sanitise the pool water.

It provides fully automatic control of pool dosing as well as control of the pool circulation pump and pool heating.

It is internet enabled allowing remote monitoring of the pool sanitisation, PH and temperature via a smart phone or the internet.

The ASIN AQUA Oxygen has four dosing pumps to deliver the highest water clarity:-

Sanitiser
PH- (acid)
Algaecide
Flocculant

(Note: Pump 3 can also be configure as PH+ (alkali) rather than algaecide if required to give both PH+ and PH- control. )

The ASIN AQUA Oxygen has an easy to use colour touch-screen control panel

It comes with a flow meter to detect when the pool circulation pump is running so that dosing only occurs when the pool water is flowing.

The ASIN AQUA Oxygen can be used for private or small commercial pools with a water volume up to 250m3

It has simple and clear operation, whilst measuring and regulating the sanitiser and PH levels in your pool.

This is an automatic dosing system which can be used for both indoor or outdoor pools and spas.

It can be used for domestic or small commercial pools

The system adds a pre-set amount of sanitiser to the pool - measured in ml/m3 per day. It also controls the PH in the pool and adds the required amounts of chemical to maintain the pool at the desired levels.

It has an easy to use touch screen control panel, which allows you to set the desired level and monitor the current levels of sanitiser and PH in the pool.
2. ASIN AQUA Oxygen Features

High quality stainless steel case
Non-chlorine pool dosing system
Colour Touchscreen
Easy operation
Multi-language menu
Compact design
4 x Peristaltic pumps
Easy installation
Advanced safety features
Water-flow meter with built in strainer
RJ45 Ethernet connection to allow internet access
Thermometer measures pool water temperature
Timer control of pool circulation pump
Optional frost control of pool circulation pump
Optional pool water level control
Includes floc mixer

Sanitiser control and dosing
The ASIN AQUA provides highly effective disinfection treatment of pool water for public and private pools. Precise measuring of sanitiser content in the pool water

The system adds a pre-set amount of sanitiser to the pool - measured in ml/m3 per day.

A typical dose rate is 10 ml/m3 per day
pH control and dosing
ASIN AQUA Oxygen is adjustable to dose pH MINUS or pH PLUS. Treatment for stabilizing of pool water acidity at the optimum level. Precise measuring by pH probe combined with the system digital intelligence controls the preset pH level of the circulating pool water in all pool operation modes and variable environment conditions.
Algaecide daily dosing
The ASIN AQUA can dose a small amount of algaecide to both outdoor and indoor pools. The regular addition of algaecide prevents the growth of all types of algae, mould and bacteria.
Flocculant
Adding a small amount of flocculant to the pool water improves the efficiency of the filtration process.

The effect of this is to greatly improve water clarity.

Slow continuous dosing of flocculation and coagulation aids that improves the capability of filtering so even the smallest invisible water impurities that are in standard conditions become unable to pass through the filter.
4. Included in the Box
The ASIN AQUA includes everything required to install the dosing system (apart from the pool chemicals and optional bund tanks)

ASIN AQUA Dosing System
pH Probe
4 x dosing valves
4 x tube weights (go on the end of the tube in the chemical container to ensure the tube stays at the bottom of the container)
2 x connection valves - control the flow of water to the water sampling circuit
Pool test kit (PH and Chlorine)
Knife to cut tubes
Plastic tubing
Water temperature sensor and pocket

Also included is the easy to read user manual which explains how to install and operate the system and also the water temperature sensor and pocket
5. Typical Installation Diagram
Pool water is constantly sampled to measure the PH level via a water sampling circuit - below

Pool water sampling circuit shown above

Chemical connections shown above

The ZPM (Zeta Potential Mixer) is included with the Asin Aqua Oxygen and mixes the flocculent into the pool water (Note that the flocculent is added before the filter)

The dosing valves supplied can either be installed directly into a pool elbow or via an optional threaded connector into a t-piece

Example of injectors installed into 1.5" t-pieces. A hole is drilled and then tapped with a G 1/4" thread

 Injectors installed into a 50mm t-piece with the threaded

end-cap. We sell all of these parts as optional items

6. ASIN AQUA Oxygen Connections

(Note: the diagram above shows the Asin Aqua Home, the Asin Aqua Oxygen is the same except there is only one probe - for PH control. The first dosing pump is for sanitiser rather than liquid chlorine)

The pool circulation pump can be connected to the output socket on the side of the ASIN AQUA Oxygen

The pool circulation pump can then be programmed with a timer in the ASIN AQUA to start and stop at the required times.

The ASIN AQUA also has the ability to act as a frost thermostat to automatically start the pool circulation pump if the air temperature falls below a user-defined temperature.

In order to use the frost stat function, the optional air thermometer should be purchased
7. Optional Remote Display
An optional remote display panel can be connected to the ASIN AQUA via a cable

The display has an attractive glass design and is normally located in the pool hall

The remote display shows:-

Pool Water temperature
PH level
Redox or free chlorine level (depending on model of ASIN AQUA purchased)

Optional Items
Various optional items are available with the ASIN AQUA range of pool dosing systems

Remote display - see section above
Pressure type sensor - measures the water level in the pool and can allow the ASIN AQUA to operate an automatic water top-up valve
Inserting DN50 plug 1/4" threaded - cap to go into a 50mm t-piece. Allows the dosing injection valves to be screwed into the cap. Provides a neater solution than drilling and tapping into a pool pipe elbow
PH7.00 and redox buffer solution - used to calibrate the probes. The probes are inserted into some of the solution to provide a reference level to check the calibration of the probes
Air thermometer - allows the ASIN AQUA to act as a frost stat to turn the pool circulation pump on when the outside air temperature falls towards zero. It also allows the ASIN aqua to control the pool heating based on the outside air temperature
OxyPure Sanitiser - please contact us for pricing and details of the OxyPure non-chlorine sanitiser
We can also supply liquid algaecide and flocculent

We also sell a drill and tap set to allow you to drill and tap the correct thread into a pool pipe fitting (eg elbow)

Prices shown for optional extra items are for when they are ordered together with the ASIN AQUA dosing system. Additional delivery charges will apply if the optional items are ordered on their own.

Please contact us for more information on these options
8. Remote Monitoring via Smartphone and Internet
The ASIN AQUA Oxygen comes with an RJ45 Ethernet socket. This allows for connection to your internet router.

This allows remote monitoring of your pool chlorine, PH and temperature levels via either an app on a smartphone or via an internet web browser

The IPool Live App is available free of charge to all ASIN AQUA Home users.

The app allows the user to remotely monitor the levels of chlorine and PH for the pool

Alerts can also be set so that if the chlorine or PH fall below or above a set level, an alert is sent to warn the operator.

This data can be viewed for a 30 day period using the iPool app or web browser.

If you do not have an internet connection where the ASIN AQUA will be located, an easy solution is to use a pair of powerline adaptors. One of the plugs goes into a socket in the pool plant room. The other plug goes next to the wifi router in the house.

An Ethernet cable is then connected from the powerline adaptor to the router and the ASIN AQUA to deliver internet connectivity.

Please contact us if you would like advice on the best way to get internet connectivity to the pool plant room.

9. Pool Heating Control
The ASIN AQUA Oxygen includes the ability to measure the pool water temperature and then control the heating to turn the pool heating on and off as required to maintain the desired temperature.

A volt-free relay in the ASIN AQUA can be connected to virtually any type of pool heat pump or pool heater. (please contact us for further advice on how to connect this to your particular pool heat pump or pool heater).

Included with the ASIN AQUA is a pool water thermometer and sleeve. 

This is inserted into the pool pipework so that the pool water temperature can be measured.

Pool Water Temperature Sensor and Pocket (supplied)
Connection of temperature sensor to pool water

10. Technical data

Power supply 230 V / 50 Hz
Power consumption 24 VA
Power consumption with pump 1449 VA
Fuse T800 mA; T160 mA; T6,3 A
Over-voltage category II
Ingress protection IP30
Operation temperature and humidity: +5 to +40°C / 60%
Output relay contacts: max 230V/1A non-voltage relay
Max. filter pump power: 1.49kW / 230V AC
Pool volume: max. 250m3
Dimensions: 430 x 330 x 160mm
Weight 6.7 kg
Mounting: wall-mounted
Dosing pump capacity: 60ml/min. / max. 1bar
FLOCC dosing pump capacity: 10ml/min. / max. 1bar
Measuring water pressure max 1,5 bar

11. Chemical Bund Tanks
We recommend that you purchase two "bund" tanks

These allow the standard 20 and 25 litre containers of liquid chlorine and acid to simply be placed inside the bund tank

This makes it very easy to swap the containers when they are empty

The bund tank is designed to hold all of the 20 or 25 litres of pool chemical should the container leak or split.

The bund tank then prevents the chemical from spreading over the floor of the pool plant room which could cause damage to the equipment in the plant room.

We have two types of bund tank available:-

Rectangular bund tank (without the raised back)
Carboy bund tanks (with a raised back)

Rectangular Bund Tanks

The rectangular bund tanks measure 210mm high x 300mm wide x 500mm deep
Carboy Bund Tanks
The carboy bund tanks have a raised back

These bund tanks should be placed on the floor whenever possible side by side.

The dimensions of the Carboy bund tanks are 300mm wide x 440mm deep x 880mm high
12. Availability
This item is in stock for immediate delivery – please allow 5-7 working days
13. Availability
This item is in stock for immediate delivery - please allow 5-7 working days
14. Delivery
The price includes FREE UK delivery.

We can ship this item to any country. Please contact us for a shipping quote.
15. Warranty
The probes come with a 2-year warranty.

We recommend that you retain the packaging in case you need to return the unit to us for repairs under the warranty. 

The warranty will not apply where the dosing system has been installed incorrectly, or has been damaged by installation, so please advise of any problems as soon as possible.
16. Technical Support
We are happy to provide technical support for all dosing systems that we supply.

We can supply all spare parts to support all ASIN AQUA dosing systems both during and after the warranty period
17. Product Literature
Please see the Literature tab at the top of the page for the Brochure and User Manual downloads.
18. Trade Customers
We also distribute these dosing systems to the pool trade.

Please contact us regarding opening a pool trade account.
19. Assistance
If you need any assistance or advice as to which model would be best for your pool, please feel free to call or Contact Us

for more information, also see our FAQs page

All items sold in accordance with our terms and conditions

for all enquiries, please contact us at enquiries@heatpumps4pools.com